pulpcore.client.pulp_rpm.ContentModulemdDefaultsApi

All URIs are relative to http://pulp

Method	HTTP request	Description
create	POST /pulp/api/v3/content/rpm/modulemd_defaults/	Create a modulemd defaults
list	GET /pulp/api/v3/content/rpm/modulemd_defaults/	List modulemd defaultss
read	GET {rpm_modulemd_defaults_href}	Inspect a modulemd defaults

create

AsyncOperationResponse create(rpm_modulemd_defaults)

Create a modulemd defaults

Trigger an asynchronous task to create content,optionally create new repository version.

Example

Basic Authentication (basicAuth):

from __future__ import print_function
import time
import pulpcore.client.pulp_rpm
from pulpcore.client.pulp_rpm.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to http://pulp
# See configuration.py for a list of all supported configuration parameters.
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure HTTP basic authorization: basicAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    username = 'YOUR_USERNAME',
    password = 'YOUR_PASSWORD'
)

# Configure API key authorization: cookieAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp",
    api_key = {
        'sessionid': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sessionid'] = 'Bearer'

# Enter a context with an instance of the API client
with pulpcore.client.pulp_rpm.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = pulpcore.client.pulp_rpm.ContentModulemdDefaultsApi(api_client)
    rpm_modulemd_defaults = pulpcore.client.pulp_rpm.RpmModulemdDefaults() # RpmModulemdDefaults | 

    try:
        # Create a modulemd defaults
        api_response = api_instance.create(rpm_modulemd_defaults)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling ContentModulemdDefaultsApi->create: %s\n" % e)

Api Key Authentication (cookieAuth):

from __future__ import print_function
import time
import pulpcore.client.pulp_rpm
from pulpcore.client.pulp_rpm.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to http://pulp
# See configuration.py for a list of all supported configuration parameters.
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure HTTP basic authorization: basicAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    username = 'YOUR_USERNAME',
    password = 'YOUR_PASSWORD'
)

# Configure API key authorization: cookieAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp",
    api_key = {
        'sessionid': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sessionid'] = 'Bearer'

# Enter a context with an instance of the API client
with pulpcore.client.pulp_rpm.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = pulpcore.client.pulp_rpm.ContentModulemdDefaultsApi(api_client)
    rpm_modulemd_defaults = pulpcore.client.pulp_rpm.RpmModulemdDefaults() # RpmModulemdDefaults | 

    try:
        # Create a modulemd defaults
        api_response = api_instance.create(rpm_modulemd_defaults)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling ContentModulemdDefaultsApi->create: %s\n" % e)

Parameters

Name	Type	Description	Notes
rpm_modulemd_defaults	RpmModulemdDefaults

Return type

AsyncOperationResponse

Authorization

basicAuth, cookieAuth

HTTP request headers

Content-Type: application/json, application/x-www-form-urlencoded, multipart/form-data
Accept: application/json

HTTP response details

Status code	Description	Response headers
202		-

[Back to top] [Back to API list] [Back to Model list] [Back to HOME]

list

PaginatedrpmModulemdDefaultsResponseList list(limit=limit, module=module, module__in=module__in, offset=offset, ordering=ordering, orphaned_for=orphaned_for, pulp_href__in=pulp_href__in, pulp_id__in=pulp_id__in, q=q, repository_version=repository_version, repository_version_added=repository_version_added, repository_version_removed=repository_version_removed, sha256=sha256, stream=stream, stream__in=stream__in, fields=fields, exclude_fields=exclude_fields)

List modulemd defaultss

ViewSet for Modulemd.

Example

Basic Authentication (basicAuth):

from __future__ import print_function
import time
import pulpcore.client.pulp_rpm
from pulpcore.client.pulp_rpm.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to http://pulp
# See configuration.py for a list of all supported configuration parameters.
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure HTTP basic authorization: basicAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    username = 'YOUR_USERNAME',
    password = 'YOUR_PASSWORD'
)

# Configure API key authorization: cookieAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp",
    api_key = {
        'sessionid': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sessionid'] = 'Bearer'

# Enter a context with an instance of the API client
with pulpcore.client.pulp_rpm.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = pulpcore.client.pulp_rpm.ContentModulemdDefaultsApi(api_client)
    limit = 56 # int | Number of results to return per page. (optional)
module = 'module_example' # str | Filter results where module matches value (optional)
module__in = ['module__in_example'] # list[str] | Filter results where module is in a comma-separated list of values (optional)
offset = 56 # int | The initial index from which to return the results. (optional)
ordering = ['ordering_example'] # list[str] | Ordering  * `pulp_id` - Pulp id * `-pulp_id` - Pulp id (descending) * `pulp_created` - Pulp created * `-pulp_created` - Pulp created (descending) * `pulp_last_updated` - Pulp last updated * `-pulp_last_updated` - Pulp last updated (descending) * `pulp_type` - Pulp type * `-pulp_type` - Pulp type (descending) * `upstream_id` - Upstream id * `-upstream_id` - Upstream id (descending) * `timestamp_of_interest` - Timestamp of interest * `-timestamp_of_interest` - Timestamp of interest (descending) * `module` - Module * `-module` - Module (descending) * `stream` - Stream * `-stream` - Stream (descending) * `profiles` - Profiles * `-profiles` - Profiles (descending) * `digest` - Digest * `-digest` - Digest (descending) * `snippet` - Snippet * `-snippet` - Snippet (descending) * `pk` - Pk * `-pk` - Pk (descending) (optional)
orphaned_for = 3.4 # float | Minutes Content has been orphaned for. -1 uses ORPHAN_PROTECTION_TIME. (optional)
pulp_href__in = ['pulp_href__in_example'] # list[str] | Multiple values may be separated by commas. (optional)
pulp_id__in = ['pulp_id__in_example'] # list[str] | Multiple values may be separated by commas. (optional)
q = 'q_example' # str |  (optional)
repository_version = 'repository_version_example' # str | Repository Version referenced by HREF (optional)
repository_version_added = 'repository_version_added_example' # str | Repository Version referenced by HREF (optional)
repository_version_removed = 'repository_version_removed_example' # str | Repository Version referenced by HREF (optional)
sha256 = 'sha256_example' # str |  (optional)
stream = 'stream_example' # str | Filter results where stream matches value (optional)
stream__in = ['stream__in_example'] # list[str] | Filter results where stream is in a comma-separated list of values (optional)
fields = ['fields_example'] # list[str] | A list of fields to include in the response. (optional)
exclude_fields = ['exclude_fields_example'] # list[str] | A list of fields to exclude from the response. (optional)

    try:
        # List modulemd defaultss
        api_response = api_instance.list(limit=limit, module=module, module__in=module__in, offset=offset, ordering=ordering, orphaned_for=orphaned_for, pulp_href__in=pulp_href__in, pulp_id__in=pulp_id__in, q=q, repository_version=repository_version, repository_version_added=repository_version_added, repository_version_removed=repository_version_removed, sha256=sha256, stream=stream, stream__in=stream__in, fields=fields, exclude_fields=exclude_fields)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling ContentModulemdDefaultsApi->list: %s\n" % e)

Api Key Authentication (cookieAuth):

from __future__ import print_function
import time
import pulpcore.client.pulp_rpm
from pulpcore.client.pulp_rpm.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to http://pulp
# See configuration.py for a list of all supported configuration parameters.
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure HTTP basic authorization: basicAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    username = 'YOUR_USERNAME',
    password = 'YOUR_PASSWORD'
)

# Configure API key authorization: cookieAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp",
    api_key = {
        'sessionid': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sessionid'] = 'Bearer'

# Enter a context with an instance of the API client
with pulpcore.client.pulp_rpm.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = pulpcore.client.pulp_rpm.ContentModulemdDefaultsApi(api_client)
    limit = 56 # int | Number of results to return per page. (optional)
module = 'module_example' # str | Filter results where module matches value (optional)
module__in = ['module__in_example'] # list[str] | Filter results where module is in a comma-separated list of values (optional)
offset = 56 # int | The initial index from which to return the results. (optional)
ordering = ['ordering_example'] # list[str] | Ordering  * `pulp_id` - Pulp id * `-pulp_id` - Pulp id (descending) * `pulp_created` - Pulp created * `-pulp_created` - Pulp created (descending) * `pulp_last_updated` - Pulp last updated * `-pulp_last_updated` - Pulp last updated (descending) * `pulp_type` - Pulp type * `-pulp_type` - Pulp type (descending) * `upstream_id` - Upstream id * `-upstream_id` - Upstream id (descending) * `timestamp_of_interest` - Timestamp of interest * `-timestamp_of_interest` - Timestamp of interest (descending) * `module` - Module * `-module` - Module (descending) * `stream` - Stream * `-stream` - Stream (descending) * `profiles` - Profiles * `-profiles` - Profiles (descending) * `digest` - Digest * `-digest` - Digest (descending) * `snippet` - Snippet * `-snippet` - Snippet (descending) * `pk` - Pk * `-pk` - Pk (descending) (optional)
orphaned_for = 3.4 # float | Minutes Content has been orphaned for. -1 uses ORPHAN_PROTECTION_TIME. (optional)
pulp_href__in = ['pulp_href__in_example'] # list[str] | Multiple values may be separated by commas. (optional)
pulp_id__in = ['pulp_id__in_example'] # list[str] | Multiple values may be separated by commas. (optional)
q = 'q_example' # str |  (optional)
repository_version = 'repository_version_example' # str | Repository Version referenced by HREF (optional)
repository_version_added = 'repository_version_added_example' # str | Repository Version referenced by HREF (optional)
repository_version_removed = 'repository_version_removed_example' # str | Repository Version referenced by HREF (optional)
sha256 = 'sha256_example' # str |  (optional)
stream = 'stream_example' # str | Filter results where stream matches value (optional)
stream__in = ['stream__in_example'] # list[str] | Filter results where stream is in a comma-separated list of values (optional)
fields = ['fields_example'] # list[str] | A list of fields to include in the response. (optional)
exclude_fields = ['exclude_fields_example'] # list[str] | A list of fields to exclude from the response. (optional)

    try:
        # List modulemd defaultss
        api_response = api_instance.list(limit=limit, module=module, module__in=module__in, offset=offset, ordering=ordering, orphaned_for=orphaned_for, pulp_href__in=pulp_href__in, pulp_id__in=pulp_id__in, q=q, repository_version=repository_version, repository_version_added=repository_version_added, repository_version_removed=repository_version_removed, sha256=sha256, stream=stream, stream__in=stream__in, fields=fields, exclude_fields=exclude_fields)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling ContentModulemdDefaultsApi->list: %s\n" % e)

Parameters

Name	Type	Description	Notes
limit	int	Number of results to return per page.	[optional]
module	str	Filter results where module matches value	[optional]
module__in	list[str]	Filter results where module is in a comma-separated list of values	[optional]
offset	int	The initial index from which to return the results.	[optional]
ordering	list[str]	Ordering * `pulp_id` - Pulp id * `-pulp_id` - Pulp id (descending) * `pulp_created` - Pulp created * `-pulp_created` - Pulp created (descending) * `pulp_last_updated` - Pulp last updated * `-pulp_last_updated` - Pulp last updated (descending) * `pulp_type` - Pulp type * `-pulp_type` - Pulp type (descending) * `upstream_id` - Upstream id * `-upstream_id` - Upstream id (descending) * `timestamp_of_interest` - Timestamp of interest * `-timestamp_of_interest` - Timestamp of interest (descending) * `module` - Module * `-module` - Module (descending) * `stream` - Stream * `-stream` - Stream (descending) * `profiles` - Profiles * `-profiles` - Profiles (descending) * `digest` - Digest * `-digest` - Digest (descending) * `snippet` - Snippet * `-snippet` - Snippet (descending) * `pk` - Pk * `-pk` - Pk (descending)	[optional]
orphaned_for	float	Minutes Content has been orphaned for. -1 uses ORPHAN_PROTECTION_TIME.	[optional]
pulp_href__in	list[str]	Multiple values may be separated by commas.	[optional]
pulp_id__in	list[str]	Multiple values may be separated by commas.	[optional]
q	str		[optional]
repository_version	str	Repository Version referenced by HREF	[optional]
repository_version_added	str	Repository Version referenced by HREF	[optional]
repository_version_removed	str	Repository Version referenced by HREF	[optional]
sha256	str		[optional]
stream	str	Filter results where stream matches value	[optional]
stream__in	list[str]	Filter results where stream is in a comma-separated list of values	[optional]
fields	list[str]	A list of fields to include in the response.	[optional]
exclude_fields	list[str]	A list of fields to exclude from the response.	[optional]

Return type

PaginatedrpmModulemdDefaultsResponseList

Authorization

basicAuth, cookieAuth

HTTP request headers

Content-Type: Not defined
Accept: application/json

HTTP response details

Status code	Description	Response headers
200		-

[Back to top] [Back to API list] [Back to Model list] [Back to HOME]

read

RpmModulemdDefaultsResponse read(rpm_modulemd_defaults_href, fields=fields, exclude_fields=exclude_fields)

Inspect a modulemd defaults

ViewSet for Modulemd.

Example

Basic Authentication (basicAuth):

from __future__ import print_function
import time
import pulpcore.client.pulp_rpm
from pulpcore.client.pulp_rpm.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to http://pulp
# See configuration.py for a list of all supported configuration parameters.
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure HTTP basic authorization: basicAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    username = 'YOUR_USERNAME',
    password = 'YOUR_PASSWORD'
)

# Configure API key authorization: cookieAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp",
    api_key = {
        'sessionid': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sessionid'] = 'Bearer'

# Enter a context with an instance of the API client
with pulpcore.client.pulp_rpm.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = pulpcore.client.pulp_rpm.ContentModulemdDefaultsApi(api_client)
    rpm_modulemd_defaults_href = 'rpm_modulemd_defaults_href_example' # str | 
fields = ['fields_example'] # list[str] | A list of fields to include in the response. (optional)
exclude_fields = ['exclude_fields_example'] # list[str] | A list of fields to exclude from the response. (optional)

    try:
        # Inspect a modulemd defaults
        api_response = api_instance.read(rpm_modulemd_defaults_href, fields=fields, exclude_fields=exclude_fields)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling ContentModulemdDefaultsApi->read: %s\n" % e)

Api Key Authentication (cookieAuth):

from __future__ import print_function
import time
import pulpcore.client.pulp_rpm
from pulpcore.client.pulp_rpm.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to http://pulp
# See configuration.py for a list of all supported configuration parameters.
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure HTTP basic authorization: basicAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    username = 'YOUR_USERNAME',
    password = 'YOUR_PASSWORD'
)

# Configure API key authorization: cookieAuth
configuration = pulpcore.client.pulp_rpm.Configuration(
    host = "http://pulp",
    api_key = {
        'sessionid': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['sessionid'] = 'Bearer'

# Enter a context with an instance of the API client
with pulpcore.client.pulp_rpm.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = pulpcore.client.pulp_rpm.ContentModulemdDefaultsApi(api_client)
    rpm_modulemd_defaults_href = 'rpm_modulemd_defaults_href_example' # str | 
fields = ['fields_example'] # list[str] | A list of fields to include in the response. (optional)
exclude_fields = ['exclude_fields_example'] # list[str] | A list of fields to exclude from the response. (optional)

    try:
        # Inspect a modulemd defaults
        api_response = api_instance.read(rpm_modulemd_defaults_href, fields=fields, exclude_fields=exclude_fields)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling ContentModulemdDefaultsApi->read: %s\n" % e)

Parameters

Name	Type	Description	Notes
rpm_modulemd_defaults_href	str
fields	list[str]	A list of fields to include in the response.	[optional]
exclude_fields	list[str]	A list of fields to exclude from the response.	[optional]

Return type

RpmModulemdDefaultsResponse

Authorization

basicAuth, cookieAuth

HTTP request headers

Content-Type: Not defined
Accept: application/json

HTTP response details

Status code	Description	Response headers
200		-

[Back to top] [Back to API list] [Back to Model list] [Back to HOME]